joki Posted July 31, 2015 Share Posted July 31, 2015 V.256:Grats on the update guys! Here is a smaller issue, that was in an older version, I have not had any time to post it thou. I just checked with the latest version and it's still in:If you change sliders in the UI (here tested with the sound / music volume) and then leave the menu by pressing ESC or the cancel button, the value is changed anyways. Furthermore, if you come back later, the slider position is reset, however its value is not. This will result in the slider not reflecting the set value, until you change its position, e.g. if the slider is at 70%, and you slide it to 0%, then press ESC or the cancel button, after you came back the volume is changed anyways and the value shows the new 0% value. Only the slider position is correct.Before:After: Link to comment Share on other sites More sharing options...
Guest mcopeman Posted July 31, 2015 Share Posted July 31, 2015 I've passed it onto the team. Thanks Melody~ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.