tadamir Posted September 22, 2015 Share Posted September 22, 2015 I could travel through this mine in one direction, but when I went to back track I was blocked going the opposite direction, at this exact spot. The path narrows and there's no going forward. Link to comment Share on other sites More sharing options...
Guest Support Posted September 22, 2015 Share Posted September 22, 2015 Are you sure you're unable to continue through - there should be a path against the one wall. I've tried replicating the issue from the coordinates in your screenshot, and could freely travel back and forth.Is this from a fresh run (v.264/5) or using an older version save game file to reach the mine?Let me know, and I'll create a report ticket once you can double check.Thanks Link to comment Share on other sites More sharing options...
tadamir Posted September 23, 2015 Author Share Posted September 23, 2015 Hi Support,I'll double check this today (if I can find the same spot again without knowing which grid reference I'm at, I could take a bunch of F8 shots to make sure)This was from a fresh run (v.264/5), that guy died, but I have a new guy in the Riken so not too far away.Cheers! Link to comment Share on other sites More sharing options...
toddajstewart Posted September 23, 2015 Share Posted September 23, 2015 Had exactly the same problem and have an almost duplicate screen shot.But I was able to get through gap eventually after a lot of back and forward and left and right. Want this issue resolved though because no doubt it will happen again to many more people. Link to comment Share on other sites More sharing options...
tadamir Posted September 23, 2015 Author Share Posted September 23, 2015 Ok so I managed to reproduce this, I got stuck in the exact same spot, this time I managed with a lot of wriggling to move forwards, but it's counter intuitive; you can't pass through the obvious gap but have to climb up and over the rock to the side, which seems weird. Not a huge issue now that I've found it's possible to finagle past, but the spot could do with some tweaking? Link to comment Share on other sites More sharing options...
Guest Support Posted September 23, 2015 Share Posted September 23, 2015 Thanks, the additional posts, details, and especially the marked image will really help them. I'll create a ticket to have the team take a look at the area to see if they need to adjust some of the paths.Bug Report Ticket #2600 createdMany Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.